1. "ニハード鋳鉄の凝固組織形成に及ぼすMoおよびWの影響", 西野 遼平, 田中 友基, 上宮田 和則, 森下 浩平, 宮原 広郁, 鉄と鋼, 110 [9] (2024) pp.653-661. DOI: 10.2355/tetsutohagane.TETSU-2023-119

  2. "高炭素高速度鋼系合金の凝固組織および 凝固過程に及ぼすCuの影響", 田中 友基, 西野 遼平, 上宮田 和則, 森下 浩平, 宮原 広郁, 鉄と鋼, 110 [7] (2024) pp.522-531. DOI: doi.org/10.2355/tetsutohagane.TETSU-2023-117

  3. "Oxide and Heat Treatment Microstructure Evolution of Melted Mark on Copper Wire under Various Heat Treatment Conditions", Suphattra Sachana, Kohei Morishita, Hirofumi Miyahara, Materials Transactions, 64 [9] (2023) pp. 2302-2308. DOI: 10.2320/matertrans.F-M2023806

  4. "Microstructures and Oxide Scale of Melted Mark on Copper Wire Solidified under Various Cooling Conditions and Subsequent Heat Exposure", Suphattra Sachana, Kohei Morishita, Hirofumi Miyahara, Materials Transactions, 64 [9] (2023) pp.2296-2301. DOI: 10.2320/matertrans.F-M2023806

  5. "Influence of Bridging on Macrosegregation in the Medium-carbon Steel Cast with a Laboratory-scale Middle-chilled Mold", Juhuai MA, S. Iwakiri, K. Morishita, H. Miyahara, ISIJ International, 63 (2023) pp.1137-1144. DOI: 10.2355/isijinternational.ISIJINT-2023-038

  6. "Solidification Microstructure and Segregation in the Medium-carbon Steel Cast with a Laboratory-scale Local-chilled Mold", Juhuai MA, M. Miou, H. Esaka, K. Morishita, H. Miyahara, ISIJ International, 63 (2023) pp.1122-1130. DOI: 10.2355/isijinternational.ISIJINT-2022-541

  7. "Microstructural Examination of Molten Marks on Copper Wire for Fire Investigation", Suphattra Sachana, K. Morishita and H. Miyahara, Forensic Sciences, 3 (2023) pp.12-19. DOI: 10.3390/forensicsci3010002

  8. "高炭素高速度鋼系合金の凝固組織に及ぼすCu添加の影響", 田中 友基, 上宮田 和則, 森下 浩平, 宮原 広郁, 鉄と鋼, 109 (2023) pp.144-148. DOI: 10.2355/tetsutohagane.TETSU-2022-068

  9. "Annealing effects on fracture process and tensile strength of non-combustible Mg products fabricated by selective laser melting", P. Bryan, H. Miyahara, K. Morishita, T. Matsumoto, H. Sakai, H. Noguchi, S. Hamada, Theoretical and Applied Fracture Mechanics, 120 (2022) pp. 103411_1-13. DOI: 10.1016/j.tafmec.2022.103411

  10. "Ultra-lightweight X-ray telescope fabricated with multiple MEMS technologies for GEO-X mission", M. Numazawa, Y. Ezoe, K. Ishikawa, D. Ishi, A. Fukushima, S. Sakuda, T. Uchino, A. Inagaki, H. Morishita, Y. Ueda, T. Murakawa, L. Sekiguchi, Y. Tsuji, I. Mitsuishi, H. Nakajima, Y. Kanamori, K. Morishita, K. Mitsuda, SPACE TELESCOPES AND INSTRUMENTATION 2022: ULTRAVIOLET TO GAMMA RAY Proceedings of the SPIE, 12181 (2022) 121815G 11 pp. DOI: 10.1117/12.2630501

  11. "Effect of MC Type Carbides on Wear Resistance of High Wear Resistant Cast Iron Rolls Developed for Work Rolls of Hot Strip Mills", K. Kamimiyada, S. Ishikawa, H. Miyahara and Y. Konno, ISIJ International, 61 [10] (2021) pp. 2597-2604. DOI: 10.2355/isijinternational.ISIJINT-2021-127 (OpenAccess)

  12. “レーザ照射による銅粉体の溶解・凝固挙動のその場観察”, 森下 浩平, 亀渕 裕介, 末丸 直也, 宮原 広郁, 銅と銅合金, 60 [1] (2021) pp. 162-166.【日本銅学会　第55回論文賞受賞】 DOI: 10.34562/jic.60.1_162

  13. “熱間圧延ロール用に開発した高耐摩耗型鋳鉄ロールの耐摩耗特性に及ぼすMC型炭化物の影響”, 上宮田 和則, 石川 晋也, 宮原 広郁, 紺野 裕司, 鉄と鋼, 106 [12] (2020) pp.883-891. DOI: 10.2355/tetsutohagane.TETSU-2020-003

  14. “Plastic strain distribution throughout the microstructure duality during the fracture process of non-combustible Mg products fabricated by selective laser melting”, P. Bryan, H. Miyahara, T. Matsumoto, S. Hamada, H. Sakai, K. Ogawa, Suyalatu, H. Noguchi, Theoretical and Applied Fracture Mechanics, 110 (2020) 102805. DOI: 10.1016/j.tafmec.2020.102805

  15. “Transformation from ferrite to austenite during/after solidification in peritectic steel systems: An x-ray imaging study(Review)”, H. Yasuda, K. Morishita, M. Yoshiya, T. Narumi, ISIJ International, 60 [12] (2020) pp. 2755-2764. DOI: 10.2355/isijinternational.ISIJINT-2020-486 (OpenAccess)

  16. "Characterization of Growing Dendrites in CrMnFeCoNi High-Entropy Alloy by Time-Resolved and In-Situ Tomography", K. Nakano, T. Narumi, K. Morishita, H. Yasuda, Materials Transactions, 61 [4] (2020) pp.596-604, DOI: 10.2320/matertrans.MT-MK2019006

  17. "Development of x-ray mirror foils using a hot plastic deformation process", N. Nakaniwa, Y. Ezoe, M, Numazawa, M. Takeo, M. Ishida, K. Ishikawa, K. Morishita, K. Nakajima, Appiled Optics, 59 [28] (2020) pp.8793-8805. DOI: 10.1364/AO.401644

  18. “Time Evolution of Solidification Structure in Ductile Cast Iron with Hypereutectic Compositions”, Chatcharit Kiattisaksri, T. Narumi, H. Yasuda, A. Sugiyama, K. Morishita, K. Kajiwara, , International Journal of Metalcasting, 14 [3] (2020) pp.794-801., DOI: 10.1007/s40962-020-00424-3

  19. “In situ observation of austenite coarsening induced by massive-like transformation during solidification in Fe-C alloys”, H. Yasuda, T. Suga, K. Ichida, T. Narumi, K. Morishita, IOP Conference Series: Materials Science and Engineering, 861 [1] (2020) 012051_1-8. DOI: 10.1088/1757-899X/861/1/012051

  20. “In-situ Measurements of Solute Partition Coefficients between Solid and Liquid Phases in Fe-Cr-Ni-Mo-Cu Alloys during Solidification”, Y. Kobayashi, K. Dobara, H. Todoroki, C. Nam, K. Morishita, H. Yasuda,, ISIJ International, 60 [2] (2020) pp.276-285, DOI: 10.2355/isijinternational.ISIJINT-2019-444

  21. "Effect of dislocation distribution on the yield stress in ferritic steel under identical dislocation density conditions", Y. Tanaka, T. Masumura, T. Tsuchiyama and S. Takaki, Scripta Materialia, 177 (2020), pp.176-180.

  22. “Dendrite fragmentation induced by massive-like delta-gamma transformation in Fe-C alloys”, H. Yasuda, K. Morishita, N. Nakatsuka, T. Nishimura, M. Yoshiya, A. Sugiyama, K. Uesugi, A. Takeuchi, Nature Communications, 10 (2019) ID:3183_1-8. DOI: 10.1038/s41467-019-11079-y

  23. "球状黒鉛鋳鉄における黒鉛の核生成及び成長の解析", 宮原 広郁, 伊東　彦, 成田 一人, 鋳造工学, 91 [10] (2019) pp.703-709, DOI: 10.11279/jfes.91.703 【日本鋳造工学会　優秀論文賞受賞】

  24. “Weakest region analysis of non-combustible Mg products fabricated by selective laser melting”, P. Bryan, H. Miyahara, T. Matsumoto, S. Hamada, H. Sakai, K. Ogawa, Suyalatu, H. Noguchi, Theoretical and Applied Fracture Mechanics, 103 (2019) 102291_1-11, DOI: 10.1016/j.tafmec.2019.102291

  25. “Selection of the massive-like delta/gamma transformation in Fe‐18mass%Cr―Xmass%Ni alloys (X=8,11,14 and 20)”, T. Nishimura, R. Matsubayashi, K. Morishita, M. Yoshiya, T. Nagira, H. Yasuda, ISIJ International, 59 [3] (2019) pp.459-465, DOI: 10.2355/isijinternational.ISIJINT-2018-726

  26. “Fe‐C鋼の一方向凝固過程におけるδ/γ変態の時間分解・その場観察”、西村 友宏、森下 浩平、吉矢 真人、柳楽 知也、安田 秀幸、鉄と鋼、105 [2] (2019) pp.168-176, DOI: 10.2355/tetsutohagane.TETSU-2018-145

  27. "Effect of Grain Size on the Yield Stress of Cold Worked Iron", Y. Tanaka, S. Takaki, T. Tsuchiyama and R. Uemori, ISIJ International, 58 [10] (2018) pp.1927-1933, DOI: 10.2355/isijinternational.ISIJINT-2018-371

  28. “Mg添加過共晶球状黒鉛鋳鉄におけるグラファイトの核生成と形状変化の時間分解その場観察”, Kiattisaksri Chatcharit, 杉山 明, 森下 浩平, 安田 秀幸, 鋳造工学, 90 [10] (2018) pp.602-612, DOI: 10.11279/jfes.90.602 【日本鋳造工学会　優秀論文賞受賞】

  29. "Surface microstructure and properties of nodular cast iron rapidly solidified by laser surface melting", R. Murakami, I. Narita and H. Miyahara, Materials Transactions, 59 [9] (2018) pp.1465-1470, DOI: 10.2320/matertrans.T-M2018831

  30. "冷間加工した鉄の降伏応力に及ぼす結晶粒径の影響", 田中 友基、高木 節雄、土山 聡宏、植森 龍治, 鉄と鋼, 104 [5] (2018) pp.284-291, DOI: 10.2355/tetsutohagane.TETSU-2017-091

  31. “Evaluation of alignment error of micropore X-ray optics caused by hot plastic deformation”, M. Numazawa, S. Ishi, Y. Ezoe, K. Takeuchi, M. Terada, M. Fujitani, K. Ishikawa, K. Nakajima, K. Morishita, T. Ohashi, K. Mitsuda, K. Nakamura and Y. Noda, Japanese Journal of Applied Physics, 57 [6] (2018) 06HJ11_pp.1-7, PDF, DOI: 10.7567/JJAP.57.06HJ11

  32. "Formation of Fe-Cr-Mo Alloy Metallic Glass Coating Using Hig-Velocity Oxy-Fuel Apparatus with Hydrogen Gas and Its Microstructural Transition at Elevated Temperatures", Y. Koga, K. Sakata, D. Oka, K. Kuwatori, I. Narita, H. Miyahara, Materials Transactions, 58 [10] (2017) pp.1444-1450, DOI: 10.2320/matertrans.T-M2017828

  33. "レーザ表面溶融処理により急速凝固させた球状黒鉛鋳鉄の表面組織と特性",村上 玲太, 成 田一人, 宮原 広郁, 溶射, 54 [1] (2017) pp.12-17



    34. 2017年以降のリスト

Miyahara Laboratory Morishita Laboratory

Department of Materials
Kyushu University
Building No. WEST-4
744 Motooka, Nishi-ku, Fukuoka 819-0395 Japan

宮原研究室　森下研究室

九州大学 大学院 工学研究院 材料工学部門
構造用金属科学講座 材料複合工学講座
福岡県 福岡市 西区元岡744　九州大学ウエスト4号館

Faculty

Professor　　Hirofumi MIYAHARA
Professor　　Kohei MORISHITA